You may think of getting Turbocharger kit for your automobile to boost up its efficiency. However, certain technical aspects come into play, which may influence your decision. Firstly, it is important to know how a turbocharger works. Keep the range of target horsepower and the type of car you are using in mind. Other factors like the purpose of the vehicle, traction levels, ability of the engine to tackle it should also be taken into account. Turbocharger kits are beneficial in terms of fuel efficiency as well, but first, you need to decide whether it is suitable for your vehicle or not.
How to Choose the Best Turbocharger Kits?
Choose the right compressor
When you decide to purchase a particular kit, make sure that you opt for the right compressor. You should focus more on efficiency than the size of the compressor when you buy it. The general thumb rule is to look out for a machine that will allow more air to flow into the cylinders of your engine. The compressor is the best way to control the movement of the vehicle and it is always mandatory to go to a right automation person to get the best turbocharger kit. Most of the companies providing Turbocharger kits offer charts, graphs, and design-graphics to the users. Two important things determine the choice of compressors, the airflow, and the boost pressure ratio of the engine.
Choose the right turbine
The turbine enables the compressor wheel to spin. You need to choose the right turbine to enhance the efficiency of the machine. Small wheels of turbine enable the compressor wheel to produce more air. This is because they allow the wheels of the compressor to spin faster. However, if you choose a too small turbine in the Turbocharger kits, the combustion chambers will be full of exhaust gas. Consider the ratio between the area to the radius as well as the overall size of the turbine. In most of the cases, the wheel’s diameter determines the size of turbine. The best ratio is to ensure that the diameter of the turbine’s wheel is around 15% of that of the compressor wheel.
Trimming the major and minor diameters of the turbine:
The relationship between the major and minor diameters of the determines the trim of the turbine or compressor wheels. An inducer is present for every wheel. It is the part of the wheel by which the air first passes. The section where the air passes at last is known as the exducer. However, larger trims also indicate less backpressure and low efficiency of the side of the compressor. You may not be willing to increase the wheel’s diameter. In these cases, you can opt for an increased trim.
Area to radius ratio
The best way to fix the A/R ratio is to calculate it before you buy the Turbocharger kits. You need to divide the cross-section of the diameter of inlet of the compressor or turbine outlet by the measurement from the shaft of the wheel and outlet area that you had measured earlier. The right assessment of A/R ensures that it will remain constant, indicating consistency in performance of the vehicle. Otherwise, it may affect the side of the compressor.
Apart from these measures, you should also try to avoid surge as much as possible. It reduces the efficiency of the vehicle. The reputed brands offer Turbocharger kit with the best accessories and parts. Choose them according to your vehicle’s configuration to increase its efficiency. If you want to know more about the turbocharger kits that are available, then you need to consult with expert mechanics to get the best available heavy-duty benefits from the turbocharger.
